Parts & Tools for Building Electronic Circuits
Welcome to the Build Circuits With Rich Parts & Tools page!
Interested in building your own electronic circuits? Whether you’re just getting started or you’ve been experimenting with electronics for years, having the right components and tools makes learning electronics easier and more enjoyable.
Below you’ll find electronic parts and equipment featured in my circuit-building experiments.
I’ll continue adding items as we explore new projects together!
Whoo Buddy!! Let’s build some circuits!
Amazon Affiliate Disclosure
As an Amazon Associate I earn from qualifying purchases.
Some links on this page are Amazon affiliate links. If you purchase through these links, I may earn a small commission at no additional cost to you.
Your support helps me continue creating beginner-friendly electronics tutorials and hands-on experiments.
Thank you for supporting Build Circuits With Rich!
Electronic Parts & Components
These are some of the components used in my electronics experiments.
SN7400N Quad NAND Gate IC
The SN7400N is a digital logic integrated circuit containing four independent 2-input NAND gates.
We used two of these gates to build an SR latch that eliminates unwanted switch-bounce transitions.
It’s an excellent IC for learning digital logic, truth tables, and basic memory circuits.
View SN7400N on Amazon
SPDT Slide Switch
An SPDT (Single Pole, Double Throw) slide switch allows one common connection to switch between two different contacts.
We used this switch to control the SET and RESET inputs of our NAND gate SR latch.
It’s useful for experimenting with digital circuits, switching signals, and mechanical contact bounce.
View SPDT Slide Switch on Amazon
LED (Light-Emitting Diode)
An LED is a semiconductor component that produces light when current flows through it in the forward direction.
We used an LED to indicate the output state of our SN7400N SR latch.
LEDs are excellent visual indicators for digital logic experiments and troubleshooting circuits.
View LEDs on Amazon
0.1 µF Ceramic Capacitor
A 0.1 µF ceramic capacitor is commonly used as a bypass or decoupling capacitor in electronic circuits.
We connected one across the SN7400N power supply pins to help reduce supply noise and voltage disturbances.
These small capacitors are useful in circuits containing logic ICs, microcontrollers, and other integrated circuits.
View Ceramic Capacitors on Amazon
Breadboard and Jumper Wires
A solderless breadboard allows us to build and test electronic circuits without permanently connecting components.
Jumper wires make it easy to connect ICs, resistors, switches, and other components.
We use breadboards in many of our Build Circuits With Rich experiments because they make circuit modifications and troubleshooting easier.
View Breadboard and Jumper Wires on Amazon
LM358 Operational Amplifier
The LM358 is a dual operational amplifier containing two independent op-amps in a single integrated circuit.
It’s an excellent component for learning about voltage amplification, negative feedback, and analog electronics.
In Video 38, we used an LM358 to build a non-inverting amplifier with a voltage gain of approximately two.
View LM358 Operational Amplifier on Amazon
Resistor Assortment Kit
Resistors are among the most important components in electronics.
They’re used to limit current, divide voltages, establish transistor operating conditions, and control amplifier gain.
A resistor assortment kit is especially useful because it provides a variety of resistance values for different projects.
View Resistor Assortment Kit on Amazon
Potentiometer
A potentiometer is a variable resistor that allows us to adjust resistance or create an adjustable voltage divider.
We’ve used potentiometers in several experiments, including our LM358 voltage amplifier and temperature detector circuits.
They’re excellent for experimenting with adjustable voltages, thresholds, and circuit behavior.
View Potentiometer on Amazon
Tools & Equipment
These are some of the tools and equipment that make building and testing electronic circuits easier.
Digital Multimeter
A digital multimeter is an essential tool for anyone learning electronics.
It allows you to measure voltage, resistance, and current, depending on the meter’s capabilities and settings.
In our experiments, we use a multimeter to check power supply voltages, measure component values, and compare actual circuit measurements with our calculations.
View Digital Multimeter on Amazon
Adjustable PCB Holder Frame
Great for holding PCBs so you can solder components on them.
View PCB holder
DSO138 Digital Oscilloscope
The DSO138 is a compact digital oscilloscope that allows us to observe changing voltage signals over time.
We used it to examine mechanical switch bounce and compare the raw switch signal with the clean output from our NAND gate SR latch.
It’s a useful educational tool for exploring waveforms, timing, and basic electronic signals.
View DSO138 Oscilloscope on Amazon
Learn How to Use These Components
Buying electronic components is only the beginning. Understanding how they work is where the fun really starts!
Visit the Build Circuits With Rich YouTube Channel to explore beginner-friendly electronics tutorials, circuit theory, and real breadboard experiments.
You can also explore our LM358 Voltage Amplifier Video to see several of these parts and tools in action.
My goal is to make learning electronics understandable, practical, and fun.
Thanks for visiting, and God bless!
Whoo Buddy!!
Want more electronics lessons?
For more beginner-friendly electronics lessons, circuit walkthroughs, and hands-on breadboard builds, visit:
https://buildcircuitswithrich.com
Prefer video?
Watch full lessons on the Build Circuits With Rich YouTube Channel.
Back To: Videos