LAB NOTES:
Step-by-Step Procedure for Loading 0000 0010The clear sequence starts at 29:51.
The binary loading demo starts at 31:15.
We’ll enter all eight bits from left to right, just as I do in the video. The order is 0, 0, 0, 0, 0, 0, 1, 0.
Step 1 — Set the starting positions.
Put S1 and S2 at A. Leave the DATA button released.
Step 2 — Clear the shift register and turn off the LEDs.
Press and hold CLEAR. While you’re holding it, flip S2 from A to B. All eight LEDs should go dark. Release CLEAR and move S2 back to A. Leave S2 at A while you load the bits.
Step 3 — Shift in the first six zeros.
Keep DATA released. Move S1 A → B → A six times. Count each trip from A to B as one bit. You’ve now clocked in the six leading zeros.
Step 4 — Shift in the one.
Press and hold DATA. Move S1 A → B → A once, then release DATA. The 1 is now in the first position inside the shift register, the position that will feed QA when you latch it.
Step 5 — Shift in the final zero.
With DATA released, move S1 A → B → A once more. The new 0 goes into the first position and pushes the 1 into the second position, which will feed QB. The LEDs are still showing the zeros you latched in Step 2.
Step 6 — Latch the number and check the LEDs.
Flip S2 from A to B. Only QB, the second LED from the right, should light. The row now displays 0000 0010. Return S2 to A when you’re ready for the next latch.
COMPONENTS AND TOOLS
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. If you buy through my Amazon affiliate links, I may earn a commission at no additional cost to you. Thanks for supporting Build Circuits With Rich!
Components and Equipment — Amazon Affiliate Links
SN7400N quad 2-input NAND gate IC https://link.amazon/B032rpPJM
SPDT slide switch https://link.amazon/B09guna18
Two 10 kΩ pull-up resistors https://link.amazon/B03XFnNUj
2.2 kΩ resistor for unused inputs https://link.amazon/B03XFnNUj
1 kΩ LED current-limiting resistor https://link.amazon/B03XFnNUj
LED https://link.amazon/B04790A2d
0.1 µF ceramic bypass capacitor https://link.amazon/B00l9i6kJ
Breadboard and jumper wires https://link.amazon/B0gQDnGBQ
Regulated 5 V DC power supply https://link.amazon/B06BdDrfX
DSO138 oscilloscope https://link.amazon/B0baLTxQj
Want more electronics lessons?
For more beginner-friendly electronics lessons, circuit walkthroughs, and hands-on breadboard builds, visit:
https://buildcircuitswithrich.com
Prefer video?
Watch full lessons on the Build Circuits With Rich YouTube Channel.
Back To: Videos